Iron On Labels
Iron labels are printed on white ribbon 50 mm in width, with a special laundry resin and is washable.
Quantity of labels: 67 labels
For printing of your logos, please send the logo via e-mail to personalisa001@gmail.com or via Whatsapp to 071 351 5677.
Designs can only be printed in black ink.
Iron On Instructions
To properly apply your iron-on labels, please follow the important instructions below:
1. Set your iron to the hottest setting - with NO STEAM!
2. Empty all water from the iron.
3. Wait until the iron gets hot.
4. Apply the labels to clean, thoroughly dry garments only. (Labels applied to soiled or damp garments will not adhere properly)
5. For the best results DO NOT apply to tags. Apply directly to clothing.
6. Place labels on garments in the desired position.
7. Cover label with a thin, dry pressing cloth.
8. FIRMLY press heated iron on pressing cloth for 10-15 seconds.
9. Verify your application time and iron temperature.
10. Allow garments and label to cool to room temperature. Then try to peel the label off with your fingernail. If you can peel it off, your iron is not hot enough. Use another iron or reapply it for 10-15 seconds.
If you have problems getting your labels to adhere properly, the following may be the problem:
1. Your iron is not hot enough. Your iron should be on the hottest setting with NO STEAM.
2. Applying the iron for too long. It may cause the labels not to stick.
3. You are not using a proper pressing cloth. The cloth's material needs to be very thin to allow heat through.
4. Everyone's iron is different. Try adjusting the amount of time you apply the iron to the labels.
NOTE: You need to use the hottest setting for every item you are labeling. However, there may be some materials to which you cannot apply a very hot iron. For example, nylon, satin, acetate, etc. In these cases, our labels are soft and thin enough to be sewn on instead.
